Tile and Grout Cleaning - Clean Australia Services

8 Mistakes to Avoid When Cleaning Tile and Grout

Grout is a porous material that can easily get dirty. This means that it’s important to give your tile and grout some TLC. However, people make some common mistakes when cleaning tile and grout, which you should avoid. If you’re not careful, these mistakes can lead to problems with mould or mildew on your floor. Here are 8 mistakes to avoid when cleaning tile and grout, so your home always looks squeaky clean.

Tile and Grout Cleaning - Clean Australia Services

Avoid using too much water when cleaning tile.

One of the most common mistakes people make when cleaning tile and grout is using too much water. Using too much water can lead to mould or mildew on your floor because it makes your tile and grout wetter than they need to be.

To avoid this mistake, sprinkle a little bit of water on the tile and then scrub with a damp mop. If you’re cleaning the grout between the tiles, use a toothbrush for a deeper clean. However, if you want to clean large spaces quickly, this might not be effective, so you’ll have to consider other options.

Avoid using harsh chemicals when cleaning tile.

Many people use harsh chemicals when cleaning their tile and grout. This is a mistake as those chemicals can leave behind residue, leading to mould and mildew. It’s recommended to use a mild cleaning that won’t leave behind any toxic residue.

Avoid using bleach as it can also cause problems with mould and mildew as it’s high in alkaline.

Tile and Grout Cleaning - Clean Australia Services

You should also avoid scrubbing tile too hard, as it can wear away the colour of your tile. That’s why a soft brush is a better option for you when cleaning your flooring.

After you’ve cleaned the grout, make sure you dry it well before walking across or through it. If moisture remains, then bacteria will grow on the floor again quickly.

It’s also necessary to minimize using scouring powders to clean tile since they might scrape the surface of your flooring, ruining its look permanently! Scratching your flooring may seem like a minor issue now, but it could become quite expensive down the road if not resolved properly.

Avoid using a sponge when cleaning tile.

Avoid grabbing a sponge and scrubbing the floor when cleaning tile. Your grout will not be as clean as you want it to be, and you’ll end up with a lot of dirty water. Instead, use a wet mop and clean cloths to clean your floor.

Avoid using vinegar to clean grout.

One mistake people make when cleaning tile and grout is using vinegar to do the job. Although vinegar can be an effective cleaning agent, it shouldn’t be used on grout. Grout is porous, which means that vinegar can soften and erode it, leaving behind a residue that could lead to mould and mildew. When you use vinegar to clean grout, it produces a strong odour that might be irritating to your nose.

Tile and Grout Cleaning - Clean Australia Services

Avoid scrubbing in large circles when cleaning grout.

Scrubbing in large circles is a common mistake people make when cleaning grout, as it can lead to more dirt and debris getting stuck in your tile and grout. Instead, you should use a gritty sponge and gently scrub the grout with small circular motions. This will help clean the grout without causing it to get dirty again.

Avoid scrubbing too hard when cleaning tile.

Cleaning tile can be difficult because it’s so porous. If you scrub too hard, you could damage the tile. This is one of the most common mistakes people make when cleaning grout. One way to help prevent this mistake is by investing in a good grout brush. You should clean your grout without scrubbing too hard if you use a decent grout brush. However, if your grout has an especially tough buildup, then it’s okay to scrub just a little bit harder for a few minutes at a time.

Avoid spraying with a hose for a quick clean-up.

Spraying your tile and grout with a hose is the quickest way to clean them, but it’s not the best. You should never use water pressure to clean grout. Doing so can cause the grout to disintegrate, which will lead to mould or mildew issues.

Tile and Grout Cleaning - Clean Australia Services

Never use bleach on your flooring.

When it comes to cleaning your floor, you want to avoid bleach at all costs. Bleach is too powerful for tile and grout, leading to discolouration or damage.

Notice that your tiles have become tired, dull and listless. Consider hiring professional tile and grout cleaners to help you! Our tile maintenance services make your tiles look and feel better than ever, increasing their life, shine, and colour. When you choose Clean Australia Service to do the service for you, you will save a lot of time and effort because we have all the necessary cleaning solutions and equipment.

Tile and Grout Cleaning - Clean Australia Services

Cleaning grout lines are a delight with our industrial level cleaning procedures and materials, and we cover big areas that are simply too much for one person to do on their own. If you’re trying to find a professional cleaning service to clean your tile and grout in Sydney, go no further than Clean Australia Service.

Leave a Reply

Your email address will not be published.